Multiquip concrete water tanks - your source of cool clean water!

Multiquip water tanks are cast using high quality concrete moulds that vibrate the concrete to achieve maximum density.

Construction:
Heavy pre-stressed steel is used for reinforcement and the tanks are cast as one piece with a removable lid and has a manhole access of 450mm square.
The side walls taper in size from 64mm thick at the top to 116mm thick at the base to give extra strength to our tank.
Our water tanks are built to last with more concrete and stronger steel making our tanks one of the strongest on the market. These tanks weigh over 10 tonne empty, with this amount of concrete and material you know there built to last.
Our tanks will not be damaged by the wind sun or fire and the tanks are algae free and vermin proof.
This 5000 gal or 22,500 Litre tank is 2.8m high and has a diameter of 3.5m. All tanks have a precast valve overflow and an outlet. The outlet is designed to release every drop of water in the tank.

Transport:
Our tanks are totally transportable even after they have been delivered, delivery is available across NSW. Our specially designed truck can deliver your tank for immediate use. Only a small amount of site preparation is needed. On a level surface simply prepare a 4m x 4m sand pad 50mm to 100mm thick, your tank will be place directly on this surface.
As our tanks are so strong and heavy they can also be placed in the either completely or partially in the ground. Simply dig a 4m x 4m hole and your tank can be placed directly into position. (A crane will be required to put the tank in the hole.) Our tanks are designed with lifting lugs so if necessary your tank can be moved easily.